View HD74LV06AFPEL_4535060.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74LV06A
Hex Inverter Buffers / Drivers with Open Drain Outputs
REJ03D0230-0600 Rev.6.00 Dec 23, 2005
Description
The HD74LV06A has six inverter buffers / drivers with open drain outputs in a 14-pin package. Low-voltage and high-speed operation is suitable for the battery-powered products (e.g., notebook computers), and the low-power consumption extends the battery life.
Features
* * * * * * * VCC = 2.0 V to 5.5 V operation All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) All outputs VO (Max.) = 5.5 V (@VCC = 2.0 V to 5.5 V, Output "Z" state) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25C) Output current 8 mA (@VCC = 3.0 V to 3.6 V), 16 mA (@VCC = 4.5 V to 5.5 V) Ordering Information
Part Name HD74LV06AFPEL HD74LV06ARPEL HD74LV06ATELL Package Type SOP-14 pin (JEITA) SOP-14 pin (JEDEC) TSSOP-14 pin Package Code (Previous Code) PRSP0014DF-B (FP-14DAV) PRSP0014DE-A (FP-14DNV) FP RP T Package Abbreviation Taping Abbreviation (Quantity) EL (2,000 pcs/reel) EL (2,500 pcs/reel) ELL (2,000 pcs/reel)
PTSP0014JA-B (TTP-14DV) Note: Please consult the sales office for the above package availability.
Function Table
Input A L H Note: H: High level L: Low level Z: High impedance Output Y Z L
Rev.6.00 Dec 23, 2005 page 1 of 7
HD74LV06A
Pin Arrangement
1A 1Y 2A
1 2 3
14 VCC 13 6A 12 6Y 11 5A 10 5Y 9 4A 8 4Y
2Y 4 3A 3Y 5 6
GND 7
(Top view)
Absolute Maximum Ratings
Item Supply voltage range Input voltage range*1 Output voltage range*1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation at 3 Ta = 25C (in still air)* Storage temperature Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -0.5 to 7.0 -20 50 35 50 785 500 -65 to 150 Unit V V V mA mA mA mA mW C Conditions
Output: L VCC: OFF Output: Z VI < 0 VO < 0 VO = 0 to VCC
SOP TSSOP
Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 7.0 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C.
Rev.6.00 Dec 23, 2005 page 2 of 7
HD74LV06A
Recommended Operating Conditions
Item Supply voltage range Input voltage range Output voltage range Output current Symbol VCC VI VO IOL Min 2.0 0 0 -- -- -- -- 0 0 0 -40 Max 5.5 5.5 5.5 50 2 8 16 200 100 20 85 Unit V V V A mA Conditions
Input transition rise or fall rate
t / v
ns/V
VCC = 2.0 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V
Operating free-air temperature
Ta
C
Note: Unused or floating inputs must be held high or low.
Logic Diagram
A Y
DC Electrical Characteristics
Ta = -40 to 85C
Item Input voltage Symbol VIH VCC (V)* 2.0 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 2.0 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Min to Max 2.3 3.0 4.5 0 to 5.5 Min to Max 5.5 Min 1.5 VCC x 0.7 VCC x 0.7 VCC x 0.7 -- -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max -- -- -- -- 0.5 VCC x 0.3 VCC x 0.3 VCC x 0.3 0.1 0.4 0.44 0.55 1 2.5 20 Unit V Test Conditions
VIL
Output voltage
VOL
V
Input current Off state output current Quiescent supply current
IIN IOZ ICC
A A A
IOL = 50 A IOL = 2 mA IOL = 8 mA IOL = 16 mA VIN = 5.5 V or GND VO = 5.5 V VIN = VCC or GND, IO = 0
0 -- -- 5 A VI or VO = 0 to 5.5 V IOFF Output leakage current Input capacitance CIN 3.3 -- 2.3 -- pF VI = VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.6.00 Dec 23, 2005 page 3 of 7
HD74LV06A
Switching Characteristics
VCC = 2.5 0.2 V
Item Propagation delay time Symbol tPLH tPHL Ta = 25C Min Typ Max -- 4.7 10.4 -- 9.5 15.2 -- 5.4 10.4 -- 7.9 15.2 Ta = -40 to 85C Min Max 1.0 13.0 1.0 18.0 1.0 13.0 1.0 18.0 Unit ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) A TO (Output) Y
VCC = 3.3 0.3 V
Item Propagation delay time Symbol tPLH tPHL Ta = 25C Min Typ Max -- 4.0 7.1 -- 7.3 10.6 -- 4.3 7.1 -- 5.8 10.6 Ta = -40 to 85C Min Max 1.0 8.5 1.0 12.0 1.0 8.5 1.0 12.0 Unit ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) A TO (Output) Y
VCC = 5.0 0.5 V
Item Propagation delay time Symbol tPLH tPHL Ta = 25C Min Typ Max -- -- -- -- 3.3 5.6 3.4 4.1 5.5 7.5 5.5 7.5 Ta = -40 to 85C Min Max 1.0 1.0 1.0 1.0 6.5 8.5 6.5 8.5 Unit ns Test Conditions CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF FROM (Input) A TO (Output) Y
Operating Characteristics
CL = 50 pF
Item Power dissipation capacitance Symbol CPD VCC (V) 3.3 5.0 Min -- -- Ta = 25C Typ 9.6 11.4 Max -- -- Unit pF Test Conditions f = 10 MHz
Noise Characteristics
CL = 50 pF
Item Quiet output, maximum dynamic VOL Quiet output, minimum dynamic VOL High-level dynamic input voltage Low-level dynamic input voltage Symbol VOL (P) VOL (V) VIH (D) VIL (D) VCC (V) 3.3 3.3 3.3 3.3 Min -- -- 2.31 -- Ta = 25C Typ 0.3 -0.1 -- -- Max 0.8 -0.8 -- 0.99 Unit V V V V Test Conditions
Rev.6.00 Dec 23, 2005 page 4 of 7
HD74LV06A
Test Circuit
VCC
RL = 1 k
CL*
Note: CL includes the probe and jig capacitance.
* Waveform - 1
tr 90% 50% VCC 90% 50% VCC
tf VCC 10% 0V tPLH VOH
Input 10%
tPHL
Output
50% VCC
VOL + 0.3 V VOL
Notes: 1. Input waveform: PRR 1 MHz, Zo = 50 , tr 3 ns, tf 3 ns 2. The output are measured one at a time with one transition per measurement.
Rev.6.00 Dec 23, 2005 page 5 of 7
HD74LV06A
Package Dimensions
JEITA Package Code P-SOP14-3.95x8.65-1.27 RENESAS Code PRSP0014DE-A Previous Code FP-14DNV MASS[Typ.] 0.13g
*1
D 8
F
14
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
*2
Index mark
HE
E
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
c
Reference Dimension in Millimeters Symbol
Min
7 bp x M L1
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Nom Max 8.65 9.05 3.95
0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0 8 5.80 6.10 6.20 1.27 0.25 0.15 0.635 0.40 0.60 1.27 1.08
JEITA Package Code P-SOP14-5.5x10.06-1.27
RENESAS Code PRSP0014DF-B
Previous Code FP-14DAV
MASS[Typ.] 0.23g
*1
D 8
A
F
14
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE
E
Index mark
*2
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
7 bp x M L1
Reference Dimension in Millimeters Symbol
c
A1
y
L
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 10.06 10.5 5.50
0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0 8 7.50 7.80 8.00 1.27 0.12 0.15 1.42 0.50 0.70 0.90 1.15
Rev.6.00 Dec 23, 2005 page 6 of 7
A
HD74LV06A
JEITA Package Code P-TSSOP14-4.4x5-0.65 RENESAS Code PTSP0014JA-B Previous Code TTP-14DV MASS[Typ.] 0.05g
*1
D
F 8
14
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE
*2
E
Index mark
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
c
7 bp x M L1
Reference Dimension in Millimeters Symbol
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 5.00 5.30 4.40
0.03 0.07 0.10 1.10 0.15 0.20 0.25 0.10 0.15 0.20 0 8 6.20 6.40 6.60 0.65 0.13 0.10 0.83 0.4 0.5 0.6 1.0
Rev.6.00 Dec 23, 2005 page 7 of 7
A
Sales Strategic Planning Div.
Keep safety first in your circuit designs!
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, China Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .5.0

▲Up To Search▲

Price & Availability of HD74LV06AFPEL

	To Download HD74LV06AFPEL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .